A few bits have been completed since the last post (the one with the hammer), including some hammering
Getting the washers either side of the wishbone was tricky to say the least, but we did it and the wishbones are on! Followed shortly by the coilovers and steering rack.
Had to make sure not to tighten anything up as it all needs undoing to twist and turn to make sure the car moves in the direction it’s supposed to.
Next came the hubs, including the brake calipers, bottom wishbone attached fine, as did the steering…
But the upper wishbone did not.
Turns out the hole won’t like up with the bolt unless the spring is compressed (makes sense as when on the ground it’ll have the weight of the car on it). So maybe we’ll undo the bottom bolt first or get a jack under it, we’ll see.